Setting up your mPOP using Bluetooth

How to setting up your mPOP Printer using Bluetooth

Connect the power cable 

There are 2 cable outlets to the right and left, and it can be wired according to where

mPOP is placed.

Wire it so it goes underneath or between the power cable hook and pull it out

through the outlet.

Insert power cable plug into electrical outlet.

Turn on the power of mPOP.

Connect the printer to the iPad 

• Select the desired device name (mPOP-XXXXX or STAR mPOP-XXXXX).
• If the device name was changed, then select the device name that it was changed to.

• When connection is completed, "Connected" will be displayed next to the device name.

Connect in printer in Shopbox

1. Open the Shopbox POS app.
2. Click on the printer icon at the top of the screen.
3. Choose the printer group you want to connect a printer to.
4. Make sure “auto detect” is turned on.
5. Press “UPDATE PRINTER LIST”.
6. Click the “select printer” bar in the middle of the screen.
7. Choose the printer you want to connect to.
8. To confirm the connection, press “TEST PRINT”.
9. The printer should now print a small slip which states “I AM WORKING”.

Nice to know

1. If you want the printer to print a receipt after every transaction, and you do not want to press print yourself, activate “Print receipt after every transaction”.
2. If you have a scanner connected to the printer, and you want to use it with the Shopbox POS app, activate “Scanner connected through printer”..